- Accueil
- Blog
- Discover Technology
- Wi-Fi installation guide
Discover Technology
01 / 08 / 2017
Wi-Fi installation guide
![Wi-Fi installation guide](https://ac.inv-static.com/images/blog/FAQ/Wifi_app_blog.jpg)
Wifi connection guide for Smartphone & Tablet devices
Please select below
Comfort Home (for Matrix heat pumps)
Step 1
Visit Android Store and download “Comfort Home” App
Step 2
Open app and accept the notifications pop up. Read the Privacy Policy and User Agreement and select Agree to continue.
Step 3
Insert “Inventor” for the registration code. Press ok to continue.
Step 4
Allow access to the pop ups (location/storage/photos).
Step 5
Select “sign up” to create a new account. Input the confirmation code that is sent to your email to complete the registration.
Step 6
Login with your account.
Step 7
Select “add device” or the “+” icon on the top right corner to add a new device.
Step 8
Make sure you are near the heat pump and the wifi router. Keep your mobile/tablet connected to your wifi and make sure you have your wifi password ready. Make sure that your wifi is set at 2.4 GHz. Select “Got it” to proceed.
Step 9
Select your wifi and insert your wifi password. Press “save” to continue.
Step 10
Select the “Heat Pump water heater”
Step 11
Select the “KJRH-120F/BMKO-E”
Step 12
On the wired controller, select “MENU”, then “WLAN SETTING” and press “OK”. Select “AP mode” and press ok. Click once the right button to selecty the “OK” command, and please “OK” to enter the WiFi mode. The WiFi icon on the wired controller will start flashing. Make sure you complete the operation in 90 seconds after the icon starts flashing. Check the “Operation completed on the bottom part of the screen of the mobile/tablet, and select the “Next step” to continue”.
Step 13
Select “Set up WiFi” to find and connect to the heat pump’s WiFi.
Step 14
In your device’s wifi networks, find the net_xx_xxxx network and press to connect. The password is “12345678”.
Step 15
Once connected to the device’s wifi, return to the APP. The process will automatically proceed. Allow for a few minutes for the process to complete.
Step 16
When the process is completed, you can select the unit’s name. Select “Confirm” to finish the process.
Step 17
The unit is connected.
Comfort Home (for Matrix heat pumps)
Step 1
Visit iOS app store and download “Comfort Home” App
Step 2
Open app and accept the notifications pop up. Read the Privacy Policy and User Agreement and select Agree to continue.
Step 3
Insert “Inventor” for the registration code. Press ok to continue.
Step 4
Allow access to the pop ups (location/storage/photos).
Step 5
Select “sign up” to create a new account. Input the confirmation code that is sent to your email to complete the registration.
Step 6
Login with your account.
Step 7
Select “add device” or the “+” icon on the top right corner to add a new device.
Step 8
Make sure you are near the heat pump and the wifi router. Keep your mobile/tablet connected to your wifi and make sure you have your wifi password ready. Make sure that your wifi is set at 2.4 GHz. Select “Got it” to proceed.
Step 9
Select your wifi and insert your wifi password. Press “save” to continue.
Step 10
Select the “Heat Pump water heater”
Step 11
Select the “KJRH-120F/BMKO-E”
Step 12
On the wired controller, select “MENU”, then “WLAN SETTING” and press “OK”. Select “AP mode” and press ok. Click once the right button to selecty the “OK” command, and please “OK” to enter the WiFi mode. The WiFi icon on the wired controller will start flashing. Make sure you complete the operation in 90 seconds after the icon starts flashing. Check the “Operation completed on the bottom part of the screen of the mobile/tablet, and select the “Next step” to continue”.
Step 13
Select “Set up WiFi” to find and connect to the heat pump’s WiFi.
Step 14
In your device’s wifi networks, find the net_xx_xxxx network and press to connect. The password is “12345678”.
Step 15
Once connected to the device’s wifi, return to the APP. The process will automatically proceed. Allow for a few minutes for the process to complete.
Step 16
When the process is completed, you can select the unit’s name. Select “Confirm” to finish the process.
Step 17
The unit is connected.
Inventor Control (for Comfort, Dark (DR2) & Supreme air conditioners)
Download & Account Registration
Step 1
Scan Android QR code
Step 1
Or visit Play Store and search for “Inventor Control” app
Step 2
Select “Register” to create a new account.
Step 3
Read the Privacy Policy and User Agreement and select Agree to continue.
Step 4
Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.
Step 5
Enter the verification code you have received.
Step 6
Proceed by setting your own password.
Creating my Home
Creating a new Home and setting up the location
Step 1
Press "My Home…" on the top left corner of your screen.
Step 2
Select “Home Management”.
Step 3
Select the default Home “My Home…” to edit it.
Step 4
Insert your Home’s identifying name and press the “Home Location”.
Step 5
Use the built-in map to pinpoint your Home’s Location and press "OK".
Joining an existing Home
Step 1
To join an existing Home, contact the administrator to get the invitation code.
Step 2
Then enter the code you have received to proceed.
Connecting your Air Conditioner with Inventor Control
Add Manually with AP Mode
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Add Manually" on the top bar, then in the left side menu, select Air Conditioner and the particular model name.
Step 3
Select your Wi-Fi and input your password.
Step 4
Plug in the air conditioner to the power supply and turn it on. Set the air conditioner to Cooling Mode, Low Fan Speed and 30°C Temperature. Verify that the pairing indication on the display of the device flashes and press Confirm to proceed.
Step 5
Press “Go to Connect” to enter your device’s Wi-Fi Networks.
Step 6
From your mobile device settings, connect to the air conditioner’s network “U-AC-XXXX”, return to the app and press "Next".
Step 7
Allow a few moments for the pairing process to complete.
Step 8
When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.
Step 9
You are all set with the remote management of your appliance!
User's Manual
Application Benefits
User Agreement
Data Privacy Notice
Inventor Control (for Comfort, Dark (DR2) & Supreme air conditioners)
Application Download & Account Creation
Step 1
Scan iOS QR code
Step 1
Or visit App Store and search for “Inventor Control” app
Step 2
Select “Register” to create a new account.
Step 3
Read the Privacy Policy and User Agreement and select Agree to continue.
Step 4
Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.
Step 5
Enter the verification code you have received.
Step 6
Proceed by setting your own password.
Creating my Home
Creating a new Home and setting up the location
Step 1
Press "My Home…" on the top left corner of your screen.
Step 2
Select “Home Management”.
Step 3
Select the default Home “My Home…” to edit it.
Step 4
Insert your Home’s identifying name and press the “Home Location”.
Step 5
Use the built-in map to pinpoint your Home’s Location and press "OK".
Joining an existing Home
Step 1
To join an existing Home, contact the administrator to get the invitation code.
Step 2
Then enter the code you have received to proceed.
Connecting your Dehumidifier with Inventor Control
Add Manually with AP Mode
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Add Manually" on the top bar, then in the left side menu, select Air Conditioner and the particular model name.
Step 3
Select your Wi-Fi and input your password.
Step 4
Plug in the air conditioner to the power supply and turn it on. Set the air conditioner to Cooling Mode, Low Fan Speed and 30°C Temperature. Verify that the pairing indication on the display of the device flashes and press Confirm to proceed.
Step 5
Press “Go to Connect” to enter your device’s Wi-Fi Networks.
Step 6
From your mobile device settings, connect to the air conditioner’s network “U-AC-XXXX”, return to the app and press "Next".
Step 7
Allow a few moments for the pairing process to complete.
Step 8
When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.
Step 9
You are all set with the remote management of your appliance!
User's Manual
Application Benefits
User Agreement
Data Privacy Notice
Inventor Control (for Atmosphere XL dehumidifiers)
Download & Account Registration
Step 1
Scan Android QR code
Step 1
Or visit Play Store and search for “Inventor Control” app
Step 2
Select “Register” to create a new account.
Step 3
Read the Privacy Policy and User Agreement and select Agree to continue.
Step 4
Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.
Step 5
Enter the verification code you have received.
Step 6
Proceed by setting your own password.
Creating my Home
Creating a new Home and setting up the location
Step 1
Press "My Home…" on the top left corner of your screen.
Step 2
Select “Home Management”.
Step 3
Select the default Home “My Home…” to edit it.
Step 4
Insert your Home’s identifying name and press the “Home Location”.
Step 5
Use the built-in map to pinpoint your Home’s Location and press "OK".
Joining an existing Home
Step 1
To join an existing Home, contact the administrator to get the invitation code.
Step 2
Then enter the code you have received to proceed.
Connecting your Dehumidifier with Inventor Control
Add Manually with Easy Pairing
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Add Manually" on the top bar, select “Dehumidifier” in the left side menu and then choose the particular model.
Step 3
Select your Wi-Fi and input your password.
Step 4
Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".
Step 5
Allow a few moments for the pairing process to complete.
Step 6
When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.
Step 7
You are all set with the remote management of your appliance!
Add Manually with AP Mode
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Add Manually" on the top bar, then in the left side menu, select Dehumidifier and the particular model name.
Step 3
Select your Wi-Fi and input your password.
Step 4
Tap on "Easy Pairing" on the top right of the screen and select "AP Mode".
Step 5
Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".
Step 6
Press “Go to Connect” to enter your device’s Wi-Fi Networks.
Step 7
From your mobile device settings, connect to the dehumidifier's network "SmartLife-XXXX". Return to the app and press "Next".
Step 8
Allow a few moments for the pairing process to complete.
Step 9
When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.
Step 10
You are all set with the remote management of your appliance!
Add Automatically
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Auto Scan" on the top bar and press "Start scanning".
Step 3
Select "Configuring Wi-Fi" to input your Wi-Fi name and password. Select "Mode" on the dehumidifier for 3 seconds to enter the pairing mode and press "Next".
Step 4
When the search is complete, your device will appear on the screen. Press “Next”.
Step 5
You are all set with the remote management of your appliance!
Note 1: Due to different Wi-Fi settings, the Add Automatically process might not be able to find your dehumidifier. In this case you can connect using one of the other two Manual methods.
Note 2: The process should be completed within 3 minutes. If not, please repeat it.
User's Manual
Application Benefits
User Agreement
Data Privacy Notice
Inventor Control (for Atmosphere XL dehumidifiers)
Application Download & Account Creation
Step 1
Scan iOS QR code
Step 1
Or visit App Store and search for “Inventor Control” app
Step 2
Select “Register” to create a new account.
Step 3
Read the Privacy Policy and User Agreement and select Agree to continue.
Step 4
Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.
Step 5
Enter the verification code you have received.
Step 6
Proceed by setting your own password.
Creating my Home
Creating a new Home and setting up the location
Step 1
Press "My Home…" on the top left corner of your screen.
Step 2
Select “Home Management”.
Step 3
Select the default Home “My Home…” to edit it.
Step 4
Insert your Home’s identifying name and press the “Home Location”.
Step 5
Use the built-in map to pinpoint your Home’s Location and press "OK".
Joining an existing Home
Step 1
To join an existing Home, contact the administrator to get the invitation code.
Step 2
Then enter the code you have received to proceed.
Connecting your Dehumidifier with Inventor Control
Add Manually with Easy Pairing
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Add Manually" on the top bar, select “Dehumidifier” in the left side menu and then choose the particular model.
Step 3
Select your Wi-Fi and input your password.
Step 4
Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".
Step 5
Allow a few moments for the pairing process to complete.
Step 6
When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.
Step 7
You are all set with the remote management of your appliance!
Add Manually with AP Mode
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Add Manually" on the top bar, then in the left side menu, select Dehumidifier and the particular model name.
Step 3
Select your Wi-Fi and input your password.
Step 4
Tap on "Easy Pairing" on the top right of the screen and select "AP Mode".
Step 5
Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".
Step 6
Press “Go to Connect” to enter your device’s Wi-Fi Networks.
Step 7
From your mobile device settings, connect to the dehumidifier's network "SmartLife-XXXX". Return to the app and press "Next".
Step 8
Allow a few moments for the pairing process to complete.
Step 9
When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.
Step 10
You are all set with the remote management of your appliance!
Add Automatically
Step 1
Select “Add Device” or the “+” icon on the top right of the screen.
Step 2
Select "Auto Scan" on the top bar and press "Start scanning".
Step 3
Select "Configuring Wi-Fi" to input your Wi-Fi name and password. Select "Mode" on the dehumidifier for 3 seconds to enter the pairing mode and press "Next".
Step 4
When the search is complete, your device will appear on the screen. Press “Next”.
Step 5
You are all set with the remote management of your appliance!
Note 1: Due to different Wi-Fi settings, the Add Automatically process might not be able to find your dehumidifier. In this case you can connect using one of the other two Manual methods.
Note 2: The process should be completed within 3 minutes. If not, please repeat it.
User's Manual
Application Benefits
User Agreement
Data Privacy Notice
Smart Clima for Android (for Dark air conditioners)
How to operate your air conditioner via Wi-Fi:
Step 1
Search and download the Smart Clima application from Google Play.
Step 2
Select Register to create a new account.
Step 3
You can create an account with your email address.
Step 4
After you have created your account, enter your email and password to log in.
Step 5
In the Home screen of the application, select the + icon on the top right corner to start setting up your air conditioner with the app.
Step 6
Select Air Conditioner, then press the Start Adding button below.
Step 7
After removing the air conditioner from the power supply and reconnect it, press the Next button.
Step 8
Power on the air conditioner, then press the Next button.
Step 9
Set the air conditioner to the following settings: cooling mode, low fan speed and 30°C. Then press the Next button.
Step 10
Search from your smartphone or tablet for the air conditioner's WLAN, with name (SSID): U-ACxxxx, and connect to it.
When connected, return to the application and press the Already connected button to proceed.
Step 11
Select your home WLAN and press the Next button.
Step 12
Input your home WLAN's password and press Next to start the network configuration process.
Step 13
In approximately 1' the process will automatically be complete.
Step 14
After that, select the city the air conditioner is being installed.
Press Save to complete the process.
Step 15
Your air conditioner will appear on the home screen of the application!
Smart Clima for iOS (for Dark air conditioners)
How to operate your air conditioner via Wi-Fi:
Step 1
Search and download the Smart Clima application from App Store.
Step 2
Select Register to create a new account.
Step 3
You can create an account with your email address.
Step 4
After you have created your account, enter your email and password to log in.
Step 5
In the Home screen of the application, select the + icon on the top right corner to start setting up your air conditioner with the app.
Step 6
Select Air Conditioner, then press the Start Adding button below.
Step 7
After removing the air conditioner from the power supply and reconnect it, press the Next button.
Step 8
Power on the air conditioner, then press the Next button.
Step 9
Set the air conditioner to the following settings: cooling mode, low fan speed and 30°C. Then press the Next button.
Step 10
Search from your smartphone or tablet for the air conditioner's WLAN, with name (SSID): U-ACxxxx, and connect to it.
When connected, return to the application and press the Already connected button to proceed.
Step 11
Select your home WLAN and press the Next button.
Step 12
Input your home WLAN's password and press Next to start the network configuration process.
Step 13
In approximately 1' the process will automatically be complete.
Step 14
After that, select the city the air conditioner is being installed. Press Save to complete the process.
Step 15
Your air conditioner will appear on the home screen of the application!
AC Freedom for Android (for Professional air conditioners)
How to operate your airconditioner via Wi-Fi:
Step 1
Search and download the AC Freedom application from Google Play.
Step 2
When prompted, scan the qr code provided in the equivalent page of the Wi-Fi User's Manual, or manually insert the activation code (6364d).
Step 3
Select "Sign in" to create a new account.
Step 4
You can create an account with either your email address or with your phone number.
Step 5
After you have created your account, enter your credentials to log in.
Step 6
In the Home screen of the application, select "+Add Device" to start setting up your air conditioner with the app.
Step 7
Reset your Air Conditioner from the remote controller, by pressing the "HEALTH" button 8 times, or by pressing together for 3 seconds the "Cool" and "+" buttons at the same time. 2 beeps will notify you that the reset was successful.
Step 8
Select your local WLAN network and input the WLAN password.
Step 9
In approximately 1' the process will automatically be complete.
Step 10
Your air conditioner will appear on the home screen of the application!
AC Freedom for iOS (for Professional air conditioners)
How to operate your airconditioner via Wi-Fi:
Step 1
Search and download the AC Freedom application from App Store.
Step 2
When prompted, scan the qr code provided in the equivalent page of the Wi-Fi User's Manual, or manually insert the activation code (6364d).
Step 3
Select "Sign in" to create a new account.
Step 4
You can create an account with either your email address or with your phone number.
Step 5
After you have created your account, enter your credentials to log in.
Step 6
In the Home screen of the application, select "+Add Device" to start setting up your air conditioner with the app.
Step 7
Reset your Air Conditioner from the remote controller, by pressing the "HEALTH" button 8 times, or by pressing together for 3 seconds the "Cool" and "+" buttons at the same time. 2 beeps will notify you that the reset was successful.
Step 8
Select your local WLAN network and input the WLAN password.
Step 9
In approximately 1' the process will automatically be complete.
Step 10
Your air conditioner will appear on the home screen of the application!
INVmate II for Android (dehumidifiers)
Wi-Fi installation
Thanks to the remote access feature, which is available on the EVA II PRO Wi-Fi & Power Wi-Fi models, complete access of your device whenever you desire is easily accomplished, from virtually anywhere! Follow the steps below, in order to connect the dehumidifier to your home's Wi-Fi network:
Step 1
Search the Play Store by typing INVMATE II.
Step 2
Install the app on your Smartphone/Tablet and open.
Step 3
Select Create Account located at the bottom right. Create an account. A confirmation email with an activation link will be sent.
Step 4
Enter your e-mail address and password. A pop-up window will inform you that you will need to activate your account by clicking on the link sent to your registration e-mail address.
Then open the e-mail you received at your registration e-mail address and click on the included link to activate your account. Return to the first screen of the app by pressing the < symbol in the upper left corner.
Step 5
Enter your email address and password and choose Sign In.
Step 6
Press Add device as shown above.
Step 7
Choose Dehumidifier from the indicated menu to connect your appliance.
Step 8
Power on your dehumidifier, wait 5 seconds then click on next.
Important Note: All the steps that will follow should be performed while the AP indication is displayed on the digital control panel of the dehumidifier, if there is no AP indication, please restart the above procedure.
Step 9
Press and hold the FILTER button of the dehumidifier for 3 seconds, once the AP indication is displayed on the control panel click on Next.
Note: If no Filter button is present, press the ION button instead.
Step 10
Connect to your dehumidifier's wireless network as shown above. Go to the wireless network settings of your Smartphone/Tablet, check for the correct indicated network name and fill in the password.
Step 11
Be certain that the connection to the wireless network has been successful.
Step 12
Return to the APP. The name of your router will be automatically displayed. Please enter your network password on the field below. Click on Start Configuration
Step 13
Once the pairing process is completed, the connection is activated.
Step 14
Choose the dehumidifier you recently added.
Step 15
The dehumidifier is now successfully connected to your wireless network!
INVmate II for iOS (dehumidifiers)
Wi-Fi installation
Thanks to the remote access feature, which is available on the EVA II PRO Wi-Fi & Power Wi-Fi models, complete access of your device whenever you desire is easily accomplished, from virtually anywhere! Follow the steps below, in order to connect the dehumidifier to your home's Wi-Fi network:
Step 1
Search and install the INVMATE II app on your Smartphone/Tablet.
Step 2
In case you are using an iPad, choose the iPhone Only option as indicated.
Step 3
Select Create Account located at the bottom right. Create an account. A confirmation email with an activation link will be sent. Follow the link provided.
Step 4
Once you activate the account, return to the app and choose Add device.
Step 5
Choose Dehumidifier from the indicated menu to connect your appliance.
Step 6
Power on your dehumidifier, wait 5 seconds then follow next step.
Important Note: All the following steps should be performed while the AP indication is being displayed on the digital control panel of the dehumidifier, if there is no AP indication, please power off and restart the above steps.
Step 7
Press and hold the FILTER button of the dehumidifier for 3 seconds, once AP is displayed on the control panel follow next step.
Note: If no Filter button is present, press the ION button instead.
Step 8
Connect to your dehumidifier's wireless network as shown above. Go to the wireless network settings of your Smartphone/Tablet, check for the correct indicated network name and fill in the password.
Step 9
Please follow the above indicated procedure. Click on the Settings icon on your Smartphone/Tablet. On the new interface click on the symbol < SETTINGS located on the top right. Scroll up until you find the Wi-Fi icon and click on it. From the list choose: connect to net_a1_xxxx wireless network and then return to the app.
Step 10
Be certain that the connection to the wireless network has been successful.
Step 11
Return to the APP. The name of your router will be automatically displayed. Please enter your network password on the field below. Click on Start Configuration
Step 12
Once the pairing process is completed, the connection is activated.
Step 13
Your connection has been completed.
Step 14
Choose the dehumidifier you have added.
Step 15
The dehumidifier is now successfully connected to your wireless network!
Passion Pro Wi-Fi Installation
Step 1
Open the louver
Step 2
Move the middle pillar
Step 3
Remove the louver
Step 4
Remove the screw placed under the right cap
Step 5
Remove the screw placed under the left cap
Step 6
Open the top
Step 7
Behind the top you will find the Wi-Fi socket
Step 8
Install the Wi-Fi module as indicated in the picture
Life Pro Wi-Fi L4V Installation
Step 1
Open the front panel of the air conditioner
Step 2
Unscrew the cover of the electrical box cover
Step 3
Find the cable with the blue plug
Step 4
Prepare the plug by removing the fuse
Step 5
Connect the Wi-Fi Module cable to the plug
Step 6
Insert the Wi-Fi module as shown in the figure and screw the screw
Step 7
Pass the cable as recommended in the picture to secure its position
Step 8
The installation has been successfully completed
INVmate II for Android (Aria, Nemesis, Passion Pro, Passion Pro II, Passion ECO, Omnia, Omnia ECO, Grande, Life Pro L5V, Premium, King, Aria, Corona air conditioners)
How does the Wi-Fi module installation procedure work?
Enable the "AP" mode on the air conditioning unit. By activating the AP mode, the unit acts as an Access Point. Create an INVmate account on which you can bind the air conditioning unit(s), so you can manage the unit remotely. Join the air conditioning unit to your home network to have access to the internet.
Enable "AP" mode on the air conditioning unit
Disconnect the AC unit from the power grid for 10 seconds. Reconnect the unit to the power grid and press the LED button repeatedly 7 times, until the "AP" notification appears on the unit's frontal panel. Note: For the next 3 minutes, the air conditioning unit doesn't accept the commands from the remote controller.
Step 1
Install the INVmate II application on your mobile/tablet. In order to find the application on Play Store, please use the following text: INVmateii or click here
Step 2
Select "Create Account" in order to create a user account
Step 3
Fill in your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then tap the "Registration" button.
Step 4
You will get the message above, press "OK"
Step 5
You will get a confirmation email at your email address. Follow the link located inside the confirmation email.
Step 6
After the registration of your user account, go back to the INVmate II application. Select "+ Add Device"
Step 7
Scan the QR code located on the white sticker
Step 8
Choose your Wi-Fi network listed, fill in the Wi-Fi network key and then press "ΟΚ"
Step 9
Please wait until the installation procedure is over (At this point, the mobile/tablet device connects to your Wi-Fi network, then to the air conditioning unit and finally to your Wi-Fi network)
Step 10
The air conditioning unit connected to your Wi-Fi network successfully. Press "ΟΚ"
Step 11
Select the air conditioning unit (e.g. AC6820)
Step 12
Select the 1st option and press "ΟΚ"
Problems?
INVmate II for iOS (Aria, Nemesis, Passion Pro, Passion Pro II, Passion ECO, Omnia, Omnia ECO, Grande, Life Pro L5V, Premium, King, Aria, Corona air conditioners)
How does the Wi-Fi module installation procedure work?
Enable the "AP" mode on the air conditioning unit. By activating the AP mode, the unit acts as an Access Point. Create an INVmate account on which you can bind the air conditioning unit(s), so you can manage the unit remotely. Join the air conditioning unit to your home network to have access to the internet.
Enable the "AP" mode on the air conditioning unit
Disconnect the AC unit from the power grid for 10 seconds. Reconnect the unit to the power grid and press the LED button repeatedly 7 times, until the "AP" notification appears on the unit’s frontal panel. Note: For the next 3 minutes, the air conditioning unit doesn't accept the commands from the remote controller.
Step 1b
Select "iPhone Only" as in the image
Step 2
Select "Create Account" in order to create a user account
Step 3
Fill in your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then tap the "Registration" button
Step 4
You will get the message above, press "ΟΚ"
Step 5
You will get a confirmation email on your email address. Follow the link located inside the confirmation email.
Step 6
After the registration of your user account, go back to the INVmate II application. Select "+ Add Device".
Step 7
In case of the message above, press "OK" in order to give access to the INVmate II to use the mobile/tablet's camera.
Step 8
Scan the QR code located on the white sticker
Step 9
Please follow the steps above
Step 10
Go to the Wi-Fi settings of your mobile/tablet device, search for the Wi-Fi network with following name: netac#### and then connect to it.
Step 11
Fill in the following password: 12345678 and then select "ΟΚ"
Step 12
Ensure that you have successfully connected to this Wi-Fi network as in the above image
Step 13
Go back to the INVmate II application, choose your Wi-Fi network and fill in the Wi-Fi network key on the "Password" field. Select "ΟΚ"
Step 14
Select "ΟΚ" and go back to your mobile/tablet's Wi-Fi settings
Step 15
Connect to your Wi-Fi network. Go back to the INVmate II application.
Step 16
The air conditioning unit has successfully connected to your Wi-Fi network. Select "ΟΚ".
Step 17
Choose the air conditioning unit (e.g. AC6820)
Step 18
Select the 1st option and press "ΟΚ". The Wi-Fi installation procedure is successful.
Problems?
INVmate for Android (Vision and Passion air conditioners)
LOCAL MODE (When you are at home)
(Note: Complete the following steps within 7 minutes)
Step 1
Go to Wi-Fi settings on your mobile/tablet and select NetHome… from the listed wireless networks
Step 2
Enter the default password 12345678
Step 3
Open up the Invmate application and press "Network"
Step 4
Select your home Wi-Fi network
Step 6
Be sure that your mobile/tablet is connected to your home Wi-Fi network. Then press "Local"
Remote Control Mode (Long distance control when you are outside)
(Please ensure that you have followed all the previous steps)
Open up the Invmate application and follow the steps below:
Create an account
Step 1
Press User
Step 2
Press Registration
Step 3
Press Agree
Step 4
Fill in all the required information and press OK to complete the registration process
Username: Must be 2-20 characters long, case sensitive with no spaces
Password: Must be 6-16 characters long, case sensitive with no spaces
Bind the AC device
Step 5
Enter your Username and Password and press Remote (You may save this information by clicking the "Remember me" checkbox)
Step 6
Press Bind
Step 8
Scan the QR packed with the Smart Kit (Please place the stick onto the AC device to avoid loss). Problems?
Press OK to complete the procedure
ΝΟΤΕ:
In case you are installing multiple air-conditioning units, follow the same procedure for the rest of the units using the same account (skipping steps 1-4).
INVmate for iOS (Vision and Passion air conditioners)
LOCAL MODE (When you are at home)
(Note: Complete the following steps within 7 minutes)
Step 1
Go to the wireless settings on your mobile/tablet
Step 2
Select NetHome… from the listed wireless networks and enter the default password: 12345678
Step 3
Open up the Invmate application and press "Network"
Step 4
Select your home Wi-Fi network
Step 5
Enter your home Wi-Fi network password
Step 7
Be sure that your mobile/tablet is connected to your home Wi-Fi network. Then press "Local"
Remote Control Mode (Long distance control when you are outside)
(Please ensure that you have followed all the previous steps)
Open up the Invmate application and follow the steps below:
Create an account
Step 1
Press User
Step 2
Press Registration
Step 3
Press Agree
Step 4
Fill in all the required information and press OK to complete the registration process
Username: Must be 2-20 characters long, case sensitive with no spaces
Password: Must be 6-16 characters long, case sensitive with no spaces
Bind the AC device
Step 5
Enter your Username and Password and press Remote (You may save this information by clicking the "Remember me" checkbox)
Step 6
Press Bind
Step 8
Scan the QR packed with the Smart Kit (Please place the stick onto the AC device to avoid loss). Problems?
Press OK to complete the procedure
ΝΟΤΕ:
In case you are installing multiple air-conditioning units, follow the same procedure for the rest of the units using the same account (skipping steps 1-4).
EWPE Smart for Android (Life Pro Wi-Fi L4V air conditioners)
How to activate the Wi-Fi operation of your air conditioner
Via EWPE Smart application, create an account and connect your Smartphone with the air conditioner unit, in order to take control of your device from wherever and whenever you want. Join the air conditioning unit to your home network to have access to the internet.
Step 1
Download for free the EWPE Smart application through Google Play.
Step 2
When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.
Step 3
Select the icon on the upper left side of your mobile screen.
Step 4
Select again the same icon at the upper side of your mobile screen.
Step 5
At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.
Step 6
Press the "+" icon at the upper right side of the mobile screen.
Step 7
Select the type of the device you have purchased to connect with.
Step 8
Press "Remote Controller with Wi-Fi button".
Step 9
Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":
1. Take the remote controller and fix at the appliance
2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.
3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.
Step 10
The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.
*the 5GHz network is not supported
Step 11
Your air conditioner has been successfully connected.
EWPE Smart for iOS (Life Pro Wi-Fi L4V air conditioners)
How to activate the Wi-Fi operation of your air conditioner
Via EWPE Smart application, create an account and connect your Smartphone with the air conditioner unit, in order to take control of your device from wherever and whenever you want. Join the air conditioning unit to your home network to have access to the internet.
Step 1
Download for free the EWPE Smart application through App Store.
Step 2
When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.
Step 3
Select the icon on the upper left side of your mobile screen.
Step 4
Select again the same icon at the upper side of your mobile screen.
Step 5
At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.
Step 6
Press the "+" icon at the upper right side of the mobile screen.
Step 7
Select the type of the device you have purchased to connect with.
Step 8
Press "Remote Controller with Wi-Fi button".
Step 9
Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":
1. Take the remote controller and fix at the appliance
2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.
3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.
Step 10
The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.
*the 5GHz network is not supported
Step 11
Your air conditioner has been successfully connected.
EWPE Smart for Android (Nemesis Pro air conditioners)
How to activate the Wi-Fi operation of your air conditioner
Via EWPE Smart application, create an account and connect your Smartphone with the air conditioner unit, in order to take control of your device from wherever and whenever you want. Join the air conditioning unit to your home network to have access to the internet.
Step 1
Download for free the EWPE Smart application through Google Play.
Step 2
When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.
Step 3
Select the icon on the upper left side of your mobile screen.
Step 4
Select again the same icon at the upper side of your mobile screen.
Step 5
At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.
Step 6
Press the "+" icon at the upper right side of the mobile screen.
Step 7
Select the type of the device you have purchased to connect with.
Step 8
Press "Remote Controller without Wi-Fi button".
Step 9
Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":
1. Take the remote controller and fix at the appliance
2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.
3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.
Step 10
The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.
*the 5GHz network is not supported
Step 11
Your air conditioner has been successfully connected.
EWPE Smart for iOS (Nemesis Pro air conditioners)
How to activate the Wi-Fi operation of your air conditioner
Via EWPE Smart application, create an account and connect your Smartphone with the air conditioner unit, in order to take control of your device from wherever and whenever you want. Join the air conditioning unit to your home network to have access to the internet.
Step 1
Download for free the EWPE Smart application through App Store.
Step 2
When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.
Step 3
Select the icon on the upper left side of your mobile screen.
Step 4
Select again the same icon at the upper side of your mobile screen.
Step 5
At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.
Step 6
Press the "+" icon at the upper right side of the mobile screen.
Step 7
Select the type of the device you have purchased to connect with.
Step 8
Press "Remote Controller without Wi-Fi button".
Step 9
Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":
1. Take the remote controller and fix at the appliance
2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.
3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.
Step 10
The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.
*the 5GHz network is not supported
Step 11
Your air conditioner has been successfully connected.