Step 1

Visit Android Store and download “Comfort Home” App

Step 2

Open app and accept the notifications pop up. Read the Privacy Policy and User Agreement and select Agree to continue.

Step 3

Insert “Inventor” for the registration code. Press ok to continue.

Step 4

Allow access to the pop ups (location/storage/photos).

Step 5

Select “sign up” to create a new account. Input the confirmation code that is sent to your email to complete the registration.

Step 6

Login with your account.

Step 7

Select “add device” or the “+” icon on the top right corner to add a new device.

Step 8

Make sure you are near the heat pump and the wifi router. Keep your mobile/tablet connected to your wifi and make sure you have your wifi password ready. Make sure that your wifi is set at 2.4 GHz. Select “Got it” to proceed.

Step 9

Select your wifi and insert your wifi password. Press “save” to continue.

Step 10

Select the “Heat Pump water heater”

Step 11

Select the “KJRH-120F/BMKO-E”

Step 12

On the wired controller, select “MENU”, then “WLAN SETTING” and press “OK”. Select “AP mode” and press ok. Click once the right button to selecty the “OK” command, and please “OK” to enter the WiFi mode. The WiFi icon on the wired controller will start flashing. Make sure you complete the operation in 90 seconds after the icon starts flashing. Check the “Operation completed on the bottom part of the screen of the mobile/tablet, and select the “Next step” to continue”.

Step 13

Select “Set up WiFi” to find and connect to the heat pump’s WiFi.

Step 14

In your device’s wifi networks, find the net_xx_xxxx network and press to connect. The password is “12345678”.

Step 15

Once connected to the device’s wifi, return to the APP. The process will automatically proceed. Allow for a few minutes for the process to complete.

Step 16

When the process is completed, you can select the unit’s name. Select “Confirm” to finish the process.

Step 17

The unit is connected.

Step 1

Visit iOS app store and download “Comfort Home” App

Step 2

Open app and accept the notifications pop up. Read the Privacy Policy and User Agreement and select Agree to continue.

Step 3

Insert “Inventor” for the registration code. Press ok to continue.

Step 4

Allow access to the pop ups (location/storage/photos).

Step 5

Select “sign up” to create a new account. Input the confirmation code that is sent to your email to complete the registration.

Step 6

Login with your account.

Step 7

Select “add device” or the “+” icon on the top right corner to add a new device.

Step 8

Make sure you are near the heat pump and the wifi router. Keep your mobile/tablet connected to your wifi and make sure you have your wifi password ready. Make sure that your wifi is set at 2.4 GHz. Select “Got it” to proceed.

Step 9

Select your wifi and insert your wifi password. Press “save” to continue.

Step 10

Select the “Heat Pump water heater”

Step 11

Select the “KJRH-120F/BMKO-E”

Step 12

On the wired controller, select “MENU”, then “WLAN SETTING” and press “OK”. Select “AP mode” and press ok. Click once the right button to selecty the “OK” command, and please “OK” to enter the WiFi mode. The WiFi icon on the wired controller will start flashing. Make sure you complete the operation in 90 seconds after the icon starts flashing. Check the “Operation completed on the bottom part of the screen of the mobile/tablet, and select the “Next step” to continue”.

Step 13

Select “Set up WiFi” to find and connect to the heat pump’s WiFi.

Step 14

In your device’s wifi networks, find the net_xx_xxxx network and press to connect. The password is “12345678”.

Step 15

Once connected to the device’s wifi, return to the APP. The process will automatically proceed. Allow for a few minutes for the process to complete.

Step 16

When the process is completed, you can select the unit’s name. Select “Confirm” to finish the process.

Step 17

The unit is connected.

Step 1

Scan Android QR code

Step 1

Or visit Play Store and search for “Inventor Control” app

Step 2

Select “Register” to create a new account.

Step 3

Read the Privacy Policy and User Agreement and select Agree to continue.

Step 4

Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.

Step 5

Enter the verification code you have received.

Step 6

Proceed by setting your own password.

Step 1

Press "My Home…" on the top left corner of your screen.

Step 2

Select “Home Management”.

Step 3

Select the default Home “My Home…” to edit it.

Step 4

Insert your Home’s identifying name and press the “Home Location”.

Step 5

Use the built-in map to pinpoint your Home’s Location and press "OK".

Step 1

To join an existing Home, contact the administrator to get the invitation code.

Step 2

Then enter the code you have received to proceed.

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Add Manually" on the top bar, then in the left side menu, select Air Conditioner and the particular model name.

Step 3

Select your Wi-Fi and input your password.

Step 4

Plug in the air conditioner to the power supply and turn it on. Set the air conditioner to Cooling Mode, Low Fan Speed and 30°C Temperature. Verify that the pairing indication on the display of the device flashes and press Confirm to proceed.

Step 5

Press “Go to Connect” to enter your device’s Wi-Fi Networks.

Step 6

From your mobile device settings, connect to the air conditioner’s network “U-AC-XXXX”, return to the app and press "Next".

Step 7

Allow a few moments for the pairing process to complete.

Step 8

When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.

Step 9

You are all set with the remote management of your appliance!

Step 1

Scan iOS QR code

Step 1

Or visit App Store and search for “Inventor Control” app

Step 2

Select “Register” to create a new account.

Step 3

Read the Privacy Policy and User Agreement and select Agree to continue.

Step 4

Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.

Step 5

Enter the verification code you have received.

Step 6

Proceed by setting your own password.

Step 1

Press "My Home…" on the top left corner of your screen.

Step 2

Select “Home Management”.

Step 3

Select the default Home “My Home…” to edit it.

Step 4

Insert your Home’s identifying name and press the “Home Location”.

Step 5

Use the built-in map to pinpoint your Home’s Location and press "OK".

Step 1

To join an existing Home, contact the administrator to get the invitation code.

Step 2

Then enter the code you have received to proceed.

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Add Manually" on the top bar, then in the left side menu, select Air Conditioner and the particular model name.

Step 3

Select your Wi-Fi and input your password.

Step 4

Plug in the air conditioner to the power supply and turn it on. Set the air conditioner to Cooling Mode, Low Fan Speed and 30°C Temperature. Verify that the pairing indication on the display of the device flashes and press Confirm to proceed.

Step 5

Press “Go to Connect” to enter your device’s Wi-Fi Networks.

Step 6

From your mobile device settings, connect to the air conditioner’s network “U-AC-XXXX”, return to the app and press "Next".

Step 7

Allow a few moments for the pairing process to complete.

Step 8

When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.

Step 9

You are all set with the remote management of your appliance!

Step 1

Scan Android QR code

Step 1

Or visit Play Store and search for “Inventor Control” app

Step 2

Select “Register” to create a new account.

Step 3

Read the Privacy Policy and User Agreement and select Agree to continue.

Step 4

Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.

Step 5

Enter the verification code you have received.

Step 6

Proceed by setting your own password.

Step 1

Press "My Home…" on the top left corner of your screen.

Step 2

Select “Home Management”.

Step 3

Select the default Home “My Home…” to edit it.

Step 4

Insert your Home’s identifying name and press the “Home Location”.

Step 5

Use the built-in map to pinpoint your Home’s Location and press "OK".

Step 1

To join an existing Home, contact the administrator to get the invitation code.

Step 2

Then enter the code you have received to proceed.

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Add Manually" on the top bar, select “Dehumidifier” in the left side menu and then choose the particular model.

Step 3

Select your Wi-Fi and input your password.

Step 4

Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".

Step 5

Allow a few moments for the pairing process to complete.

Step 6

When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.

Step 7

You are all set with the remote management of your appliance!

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Add Manually" on the top bar, then in the left side menu, select Dehumidifier and the particular model name.

Step 3

Select your Wi-Fi and input your password.

Step 4

Tap on "Easy Pairing" on the top right of the screen and select "AP Mode".

Step 5

Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".

Step 6

Press “Go to Connect” to enter your device’s Wi-Fi Networks.

Step 7

From your mobile device settings, connect to the dehumidifier's network "SmartLife-XXXX". Return to the app and press "Next".

Step 8

Allow a few moments for the pairing process to complete.

Step 9

When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.

Step 10

You are all set with the remote management of your appliance!

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Auto Scan" on the top bar and press "Start scanning".

Step 3

Select "Configuring Wi-Fi" to input your Wi-Fi name and password. Select "Mode" on the dehumidifier for 3 seconds to enter the pairing mode and press "Next".

Step 4

When the search is complete, your device will appear on the screen. Press “Next”.

Step 5

You are all set with the remote management of your appliance!

Step 1

Scan iOS QR code

Step 1

Or visit App Store and search for “Inventor Control” app

Step 2

Select “Register” to create a new account.

Step 3

Read the Privacy Policy and User Agreement and select Agree to continue.

Step 4

Select your Region and enter you email address or your mobile phone number to receive a verification code. Press “Get Verification Code”.

Step 5

Enter the verification code you have received.

Step 6

Proceed by setting your own password.

Step 1

Press "My Home…" on the top left corner of your screen.

Step 2

Select “Home Management”.

Step 3

Select the default Home “My Home…” to edit it.

Step 4

Insert your Home’s identifying name and press the “Home Location”.

Step 5

Use the built-in map to pinpoint your Home’s Location and press "OK".

Step 1

To join an existing Home, contact the administrator to get the invitation code.

Step 2

Then enter the code you have received to proceed.

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Add Manually" on the top bar, select “Dehumidifier” in the left side menu and then choose the particular model.

Step 3

Select your Wi-Fi and input your password.

Step 4

Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".

Step 5

Allow a few moments for the pairing process to complete.

Step 6

When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.

Step 7

You are all set with the remote management of your appliance!

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Add Manually" on the top bar, then in the left side menu, select Dehumidifier and the particular model name.

Step 3

Select your Wi-Fi and input your password.

Step 4

Tap on "Easy Pairing" on the top right of the screen and select "AP Mode".

Step 5

Press the "MODE" button on the dehumidifier for 3 seconds to enter the pairing mode. Verify that the pairing indication on the display of the device flashes quickly and press "Next".

Step 6

Press “Go to Connect” to enter your device’s Wi-Fi Networks.

Step 7

From your mobile device settings, connect to the dehumidifier's network "SmartLife-XXXX". Return to the app and press "Next".

Step 8

Allow a few moments for the pairing process to complete.

Step 9

When the pairing is completed if you wish, you may rename your device. Press "Done" when ready.

Step 10

You are all set with the remote management of your appliance!

Step 1

Select “Add Device” or the “+” icon on the top right of the screen.

Step 2

Select "Auto Scan" on the top bar and press "Start scanning".

Step 3

Select "Configuring Wi-Fi" to input your Wi-Fi name and password. Select "Mode" on the dehumidifier for 3 seconds to enter the pairing mode and press "Next".

Step 4

When the search is complete, your device will appear on the screen. Press “Next”.

Step 5

You are all set with the remote management of your appliance!

Step 1

Search and download the Smart Clima application from Google Play.

Step 2

Select Register to create a new account.

Step 3

You can create an account with your email address.

Step 4

After you have created your account, enter your email and password to log in.

Step 5

In the Home screen of the application, select the + icon on the top right corner to start setting up your air conditioner with the app.

Step 6

Select Air Conditioner, then press the Start Adding button below.

Step 7

After removing the air conditioner from the power supply and reconnect it, press the Next button.

Step 8

Power on the air conditioner, then press the Next button.

Step 9

Set the air conditioner to the following settings: cooling mode, low fan speed and 30°C. Then press the Next button.

Step 10

Search from your smartphone or tablet for the air conditioner's WLAN, with name (SSID): U-ACxxxx, and connect to it.

When connected, return to the application and press the Already connected button to proceed.

Step 11

Select your home WLAN and press the Next button.

Step 12

Input your home WLAN's password and press Next to start the network configuration process.

Step 13

In approximately 1' the process will automatically be complete.

Step 14

After that, select the city the air conditioner is being installed.

Press Save to complete the process.

Step 15

Your air conditioner will appear on the home screen of the application!

Step 1

Search and download the Smart Clima application from App Store.

Step 2

Select Register to create a new account.

Step 3

You can create an account with your email address.

Step 4

After you have created your account, enter your email and password to log in.

Step 5

In the Home screen of the application, select the + icon on the top right corner to start setting up your air conditioner with the app.

Step 6

Select Air Conditioner, then press the Start Adding button below.

Step 7

After removing the air conditioner from the power supply and reconnect it, press the Next button.

Step 8

Power on the air conditioner, then press the Next button.

Step 9

Set the air conditioner to the following settings: cooling mode, low fan speed and 30°C. Then press the Next button.

Step 10

Search from your smartphone or tablet for the air conditioner's WLAN, with name (SSID): U-ACxxxx, and connect to it.

When connected, return to the application and press the Already connected button to proceed.

Step 11

Select your home WLAN and press the Next button.

Step 12

Input your home WLAN's password and press Next to start the network configuration process.

Step 13

In approximately 1' the process will automatically be complete.

Step 14

After that, select the city the air conditioner is being installed. Press Save to complete the process.

Step 15

Your air conditioner will appear on the home screen of the application!

Step 1

Search and download the AC Freedom application from Google Play.

Step 2

When prompted, scan the qr code provided in the equivalent page of the Wi-Fi User's Manual, or manually insert the activation code (6364d).

Step 3

Select "Sign in" to create a new account.

Step 4

You can create an account with either your email address or with your phone number.

Step 5

After you have created your account, enter your credentials to log in.

Step 6

In the Home screen of the application, select "+Add Device" to start setting up your air conditioner with the app.

Step 7

Reset your Air Conditioner from the remote controller, by pressing the "HEALTH" button 8 times, or by pressing together for 3 seconds the "Cool" and "+" buttons at the same time. 2 beeps will notify you that the reset was successful.

Step 8

Select your local WLAN network and input the WLAN password.

Step 9

In approximately 1' the process will automatically be complete.

Step 10

Your air conditioner will appear on the home screen of the application!

Step 1

Search and download the AC Freedom application from App Store.

Step 2

When prompted, scan the qr code provided in the equivalent page of the Wi-Fi User's Manual, or manually insert the activation code (6364d).

Step 3

Select "Sign in" to create a new account.

Step 4

You can create an account with either your email address or with your phone number.

Step 5

After you have created your account, enter your credentials to log in.

Step 6

In the Home screen of the application, select "+Add Device" to start setting up your air conditioner with the app.

Step 7

Reset your Air Conditioner from the remote controller, by pressing the "HEALTH" button 8 times, or by pressing together for 3 seconds the "Cool" and "+" buttons at the same time. 2 beeps will notify you that the reset was successful.

Step 8

Select your local WLAN network and input the WLAN password.

Step 9

In approximately 1' the process will automatically be complete.

Step 10

Your air conditioner will appear on the home screen of the application!

Step 1

Search the Play Store by typing INVMATE II.

Step 2

Install the app on your Smartphone/Tablet and open.

Step 3

Select Create Account located at the bottom right. Create an account. A confirmation email with an activation link will be sent.

Step 4

Enter your e-mail address and password. A pop-up window will inform you that you will need to activate your account by clicking on the link sent to your registration e-mail address.

Then open the e-mail you received at your registration e-mail address and click on the included link to activate your account. Return to the first screen of the app by pressing the < symbol in the upper left corner.

Step 5

Enter your email address and password and choose Sign In.

Step 6

Press Add device as shown above.

Step 7

Choose Dehumidifier from the indicated menu to connect your appliance.

Step 8

Power on your dehumidifier, wait 5 seconds then click on next.

Important Note: All the steps that will follow should be performed while the AP indication is displayed on the digital control panel of the dehumidifier, if there is no AP indication, please restart the above procedure.

Step 9

Press and hold the FILTER button of the dehumidifier for 3 seconds, once the AP indication is displayed on the control panel click on Next.

Note: If no Filter button is present, press the ION button instead.

Step 10

Connect to your dehumidifier's wireless network as shown above. Go to the wireless network settings of your Smartphone/Tablet, check for the correct indicated network name and fill in the password.

Step 11

Be certain that the connection to the wireless network has been successful.

Step 12

Return to the APP. The name of your router will be automatically displayed. Please enter your network password on the field below. Click on Start Configuration

Step 13

Once the pairing process is completed, the connection is activated.

Step 14

Choose the dehumidifier you recently added.

Step 15

The dehumidifier is now successfully connected to your wireless network!

Step 1

Search and install the INVMATE II app on your Smartphone/Tablet.

Step 2

In case you are using an iPad, choose the iPhone Only option as indicated.

Step 3

Select Create Account located at the bottom right. Create an account. A confirmation email with an activation link will be sent. Follow the link provided.

Step 4

Once you activate the account, return to the app and choose Add device.

Step 5

Choose Dehumidifier from the indicated menu to connect your appliance.

Step 6

Power on your dehumidifier, wait 5 seconds then follow next step.

Important Note: All the following steps should be performed while the AP indication is being displayed on the digital control panel of the dehumidifier, if there is no AP indication, please power off and restart the above steps.

Step 7

Press and hold the FILTER button of the dehumidifier for 3 seconds, once AP is displayed on the control panel follow next step.

Note: If no Filter button is present, press the ION button instead.

Step 8

Connect to your dehumidifier's wireless network as shown above. Go to the wireless network settings of your Smartphone/Tablet, check for the correct indicated network name and fill in the password.

Step 9

Please follow the above indicated procedure. Click on the Settings icon on your Smartphone/Tablet. On the new interface click on the symbol < SETTINGS located on the top right. Scroll up until you find the Wi-Fi icon and click on it. From the list choose: connect to net_a1_xxxx wireless network and then return to the app.

Step 10

Be certain that the connection to the wireless network has been successful.

Step 11

Return to the APP. The name of your router will be automatically displayed. Please enter your network password on the field below. Click on Start Configuration

Step 12

Once the pairing process is completed, the connection is activated.

Step 13

Your connection has been completed.

Step 14

Choose the dehumidifier you have added.

Step 15

The dehumidifier is now successfully connected to your wireless network!

Step 1

Open the louver

Step 2

Move the middle pillar

Step 3

Remove the louver

Step 4

Remove the screw placed under the right cap

Step 5

Remove the screw placed under the left cap

Step 6

Open the top

Step 7

Behind the top you will find the Wi-Fi socket

Step 8

Install the Wi-Fi module as indicated in the picture

Step 1

Open the front panel of the air conditioner

Step 2

Unscrew the cover of the electrical box cover

Step 3

Find the cable with the blue plug

Step 4

Prepare the plug by removing the fuse

Step 5

Connect the Wi-Fi Module cable to the plug

Step 6

Insert the Wi-Fi module as shown in the figure and screw the screw

Step 7

Pass the cable as recommended in the picture to secure its position

Step 8

The installation has been successfully completed

Enable "AP" mode on the air conditioning unit

Disconnect the AC unit from the power grid for 10 seconds. Reconnect the unit to the power grid and press the LED button repeatedly 7 times, until the "AP" notification appears on the unit's frontal panel. Note: For the next 3 minutes, the air conditioning unit doesn't accept the commands from the remote controller.

Step 1

Install the INVmate II application on your mobile/tablet. In order to find the application on Play Store, please use the following text: INVmateii or click here

Step 2

Select "Create Account" in order to create a user account

Step 3

Fill in your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then tap the "Registration" button.

Step 4

You will get the message above, press "OK"

Step 5

You will get a confirmation email at your email address. Follow the link located inside the confirmation email.

Step 6

After the registration of your user account, go back to the INVmate II application. Select "+ Add Device"

Step 7

Scan the QR code located on the white sticker

Step 8

Choose your Wi-Fi network listed, fill in the Wi-Fi network key and then press "ΟΚ"

Step 9

Please wait until the installation procedure is over (At this point, the mobile/tablet device connects to your Wi-Fi network, then to the air conditioning unit and finally to your Wi-Fi network)

Step 10

The air conditioning unit connected to your Wi-Fi network successfully. Press "ΟΚ"

Step 11

Select the air conditioning unit (e.g. AC6820)

Step 12

Select the 1^st option and press "ΟΚ"

Enable the "AP" mode on the air conditioning unit

Disconnect the AC unit from the power grid for 10 seconds. Reconnect the unit to the power grid and press the LED button repeatedly 7 times, until the "AP" notification appears on the unit’s frontal panel. Note: For the next 3 minutes, the air conditioning unit doesn't accept the commands from the remote controller.

Step 1a

Install INVmateII on your mobile/tablet

Step 1b

Select "iPhone Only" as in the image

Step 2

Select "Create Account" in order to create a user account

Step 3

Fill in your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then tap the "Registration" button

Step 4

You will get the message above, press "ΟΚ"

Step 5

You will get a confirmation email on your email address. Follow the link located inside the confirmation email.

Step 6

After the registration of your user account, go back to the INVmate II application. Select "+ Add Device".

Step 7

In case of the message above, press "OK" in order to give access to the INVmate II to use the mobile/tablet's camera.

Step 8

Scan the QR code located on the white sticker

Step 9

Please follow the steps above

Step 10

Go to the Wi-Fi settings of your mobile/tablet device, search for the Wi-Fi network with following name: netac#### and then connect to it.

Step 11

Fill in the following password: 12345678 and then select "ΟΚ"

Step 12

Ensure that you have successfully connected to this Wi-Fi network as in the above image

Step 13

Go back to the INVmate II application, choose your Wi-Fi network and fill in the Wi-Fi network key on the "Password" field. Select "ΟΚ"

Step 14

Select "ΟΚ" and go back to your mobile/tablet's Wi-Fi settings

Step 15

Connect to your Wi-Fi network. Go back to the INVmate II application.

Step 16

The air conditioning unit has successfully connected to your Wi-Fi network. Select "ΟΚ".

Step 17

Choose the air conditioning unit (e.g. AC6820)

Step 18

Select the 1^st option and press "ΟΚ". The Wi-Fi installation procedure is successful.

Step 1

Go to Wi-Fi settings on your mobile/tablet and select NetHome… from the listed wireless networks

Step 2

Enter the default password 12345678

Step 3

Open up the Invmate application and press "Network"

Step 4

Select your home Wi-Fi network

Step 5

Enter your home Wi-Fi password and press "OK". Problems?

Step 6

Be sure that your mobile/tablet is connected to your home Wi-Fi network. Then press "Local"

Step 7

Select the AC device from the list and then enter the default password: 12345678. Problems?

Step 1

Press User

Step 2

Press Registration

Step 3

Press Agree

Step 4

Fill in all the required information and press OK to complete the registration process

Username: Must be 2-20 characters long, case sensitive with no spaces

Password: Must be 6-16 characters long, case sensitive with no spaces

Step 5

Enter your Username and Password and press Remote (You may save this information by clicking the "Remember me" checkbox)

Step 6

Press Bind

Step 7

Press Scan QR Code. Problems?

Step 8

Scan the QR packed with the Smart Kit (Please place the stick onto the AC device to avoid loss). Problems?

Press OK to complete the procedure

Step 1

Go to the wireless settings on your mobile/tablet

Step 2

Select NetHome… from the listed wireless networks and enter the default password: 12345678

Step 3

Open up the Invmate application and press "Network"

Step 4

Select your home Wi-Fi network

Step 5

Enter your home Wi-Fi network password

Step 6

When you see the message above, the connection is successful. Problems?

Step 7

Be sure that your mobile/tablet is connected to your home Wi-Fi network. Then press "Local"

Step 8

Select the AC device from the list and then enter the default password: 12345678. Problems?

Step 1

Press User

Step 2

Press Registration

Step 3

Press Agree

Step 4

Fill in all the required information and press OK to complete the registration process

Username: Must be 2-20 characters long, case sensitive with no spaces

Password: Must be 6-16 characters long, case sensitive with no spaces

Step 5

Enter your Username and Password and press Remote (You may save this information by clicking the "Remember me" checkbox)

Step 6

Press Bind

Step 7

Press Scan QR Code. Problems?

Step 8

Scan the QR packed with the Smart Kit (Please place the stick onto the AC device to avoid loss). Problems?

Press OK to complete the procedure

Step 1

Download for free the EWPE Smart application through Google Play.

Step 2

When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.

Step 3

Select the icon on the upper left side of your mobile screen.

Step 4

Select again the same icon at the upper side of your mobile screen.

Step 5

At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.

Step 6

Press the "+" icon at the upper right side of the mobile screen.

Step 7

Select the type of the device you have purchased to connect with.

Step 8

Press "Remote Controller with Wi-Fi button".

Step 9

Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":

1. Take the remote controller and fix at the appliance

2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.

3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.

Step 10

The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.

*the 5GHz network is not supported

Step 11

Your air conditioner has been successfully connected.

Step 1

Download for free the EWPE Smart application through App Store.

Step 2

When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.

Step 3

Select the icon on the upper left side of your mobile screen.

Step 4

Select again the same icon at the upper side of your mobile screen.

Step 5

At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.

Step 6

Press the "+" icon at the upper right side of the mobile screen.

Step 7

Select the type of the device you have purchased to connect with.

Step 8

Press "Remote Controller with Wi-Fi button".

Step 9

Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":

1. Take the remote controller and fix at the appliance

2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.

3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.

Step 10

The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.

*the 5GHz network is not supported

Step 11

Your air conditioner has been successfully connected.

Step 1

Download for free the EWPE Smart application through Google Play.

Step 2

When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.

Step 3

Select the icon on the upper left side of your mobile screen.

Step 4

Select again the same icon at the upper side of your mobile screen.

Step 5

At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.

Step 6

Press the "+" icon at the upper right side of the mobile screen.

Step 7

Select the type of the device you have purchased to connect with.

Step 8

Press "Remote Controller without Wi-Fi button".

Step 9

Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":

1. Take the remote controller and fix at the appliance

2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.

3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.

Step 10

The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.

*the 5GHz network is not supported

Step 11

Your air conditioner has been successfully connected.

Step 1

Download for free the EWPE Smart application through App Store.

Step 2

When the installation is completed, open the app to begin with the connection of your Smartphone with your air conditioner.

Step 3

Select the icon on the upper left side of your mobile screen.

Step 4

Select again the same icon at the upper side of your mobile screen.

Step 5

At that stage fulfill your email address and a password (the password must meet the following criteria: 6-16 alphanumeric characters, lower or uppercase, no spaces) and then press the "Sign Up" button.

Step 6

Press the "+" icon at the upper right side of the mobile screen.

Step 7

Select the type of the device you have purchased to connect with.

Step 8

Press "Remote Controller without Wi-Fi button".

Step 9

Follow the below steps that are mentioned on the above screen and afterwards select the button "Next":

1. Take the remote controller and fix at the appliance

2. Under remote controller off status, press Mode + Turbo combination buttons for 10s. once the appliance beeps for 2 seconds, this indicates that the appliance Wi-Fi reset was successful.

3. Prompt: configure within 2 min after reset; reset again if configuration isn't done within 2 min.

Step 10

The application shows up all the available network connections, to select the one, you want to connect your device with. Fill all the necessary fields and press the "Search Device" to connect with your air conditioner.

*the 5GHz network is not supported

Step 11

Your air conditioner has been successfully connected.